Preparing for the Hedge Trimming season?
25th August 2016
Now that we have lost a month's trimming it is more important than ever to make sure your trimmer is in top condition for a hassle free season. Shelbourne Reynolds service team have compiled a short checklist that will help you with essential servicing.
New technique could make crimping more attractive
15th August 2016
Developed originally for use on combines to speed grain harvesting by taking in only the ears, contractors in Denmark are fitting stripper headers on forage harvesters to allow production of crimped grain in a single process. Martin Rickatson learnt more.
Shelbourne Reynolds has revised its short-wheelbase Powerspread Pro side-discharge tank spreader range for next season, to improve ride and handling, ease of loading, longevity of moving parts and visibility to road traffic. The new models make their national show debut at the Livestock Event at the NEC, Birmingham, on July 6-7.
Trimmer Roadshows 2016
4th April 2016
We will be holding a number of Trimmer Roadshows in conjunction with some dealerships over the next couple of months.
Variable-rate seeding and fertilizer application, and keeping fields covered, is enhancing South Dakota grower Todd Yackley's successes with no-tilling. Without the use of precision ag tools, Todd Yackley believes he’d be far less successful no-tilling 40,000 acres near Gettysburg in central South Dakota.
New 800 Series hedge trimmer range aimed at meeting contractor demands
22nd December 2015
A new line of heavy-duty, contractor-targeted Shelbourne hedge trimmers is being launched at LAMMA 2016.
USING a Shelbourne Reynolds combine harvester stripper front in grain is getting some interest among no-till farmers in light northern Victoria crops, but the jury's out in wetter country.
Stripper front fits no-till bill
21st December 2015
They're cheaper on fuel, easier on harvesters and process more grain than straw, and may fit the bill in no-till, but they're not for everyone. That's the feedback from a series of demonstrations of a Shelbourne Reynolds stripper front run by the east coast distributor, NSW Deere dealer Hutcheon and Pearce that took in southern NSW and Victoria.
Customer feedback drives launch of new diet feeder range
26th November 2015
Faster bale processing, improved manoeuvrability and a lower power requirement when mixing are among the key features of a new range of Powermix vertical auger diet feeders from manufacturer Shelbourne Reynolds.
NEW Powermix Plus
19th October 2015
Since its launch in 1993 everything about the Shelbourne Powermix has been designed around customer requests and requirements. The latest Powermix Plus is no exception, after 3 years of design work and customer consultation the first production machines are now on farm.
With a wet harvest putting extra pressure on farmers who will already be a month behind their usual pre-cultivation hedge trimming routine thanks to new rules on the practice, Suffolk-based hedgecutter manufacturer Shelbourne Reynolds is urging operators to ensure machines are fully fit and ready for a months' extra growth and the increased output required by a reduced trimming window.
We are pleased to announce the launch of a new finance program at the Livestock Event on July 8th and 9th at the NEC, Birmingham. The scheme is available on a limited number of single auger Powermix Pro machines between 9 and 15 cubic metres in size. These machines feature Shelbourne's industry leading Express webbing conveyor system.
SHELBOURNE REYNOLDS POWERSPREAD PRO 2400
27th February 2015
This month I caught up with the team at Toplink Machinery in Te Awamutu, who had a Shelbourne Reynolds Powerspread Pro 2400 muck spreader out on demonstration at Kevin and Simon Clark's 360 hectare dairy and drystock property on the bank of the Waikato River, near Maungatautari.
DURABILITY ENHANCED AS TWIN-AUGER DIET FEEDERS BEEFED UP FOR 2015
12th January 2015
With the national average dairy and beef herd sizes continuing to increase, many twin-auger diet feeders are now mixing in excess of 100 tonnes of feed daily. In response to the greater demands this is placing on machines, manufacturer Shelbourne Reynolds is upgrading its twin auger Powermix Pro Twin Express feeders for 2015.
Diet feeder duo's different roles
14th November 2014
There are two Shelbourne Reynolds Powermix machines on JF Temple and Son's north Norfolk dairy unit, but only one is used for feeding the farm's 98-head dairy herd and its followers.
12th November 2014
Shelbourne Reynolds introduced its first variable forward reach VFR hedge and verge cutters in 2007, adding telescopic VFRT models at the beginning of 2014. Here we take a look at the larger of the two new VFRT units, the HD775. With a total reach of 7.50m, the machine allows the flail head to be operated in various positions including up to 2.5m ahead of the tractor
MAKER OFFERS TIPS TO ENSURE MIXERS ARE FIT FOR WINTER FEEDING
9th October 2014
With grass growth slowing and cattle likely to soon be brought in for winter, diet feeder maker Shelbourne Reynolds is reminding dairy and beef farmers to check over their machines before putting them into action.
With manoeuvrability and safety issues associated with transporting combine cutterbars coming under scrutiny as they get ever wider, header trailer manufacturer Shelbourne Reynolds has introduced three new all-wheel steer variants at the top end of its range designed to address both concerns.
Shelbourne Reynolds is broadening its range of Variable Forward Reach Telescopic (VFRT) hedgetrimmers, launched at January's LAMMA.
NEW HEDGECUTTERS MAKE INTERNATIONAL DEBUT
4th June 2014
Shelbourne Reynolds is using Grassland and Muck 2014 to unveil a new range of hedge/verge cutters which are specifically aimed at farmers seeking a mid-range machine.
Grasslands & Muck 2014
16th May 2014
Come and visit us at the Grasslands & Muck Event 21st and 22nd May 2014.
Virgin London Marathon 2014
14th April 2014
Here at Shelbourne Reynolds we are all very proud of one of our employees after she completed her second Virgin London Marathon
New Bystronic Laser
14th August 2013
As part of Shelbourne Reynolds continued investment programme we have just installed a state of the art 'Evolutionary' piece of technology in the form of a Bystronic BySprint 3kW Fiber laser cutting system.
An innovative new hedgecutter forms the centrepiece of the Shelbourne Reynolds stand at LAMMA 2014.
3rd January 2014
Shelbourne Reynolds is looking forward to exhibiting at this year's Lamma Show.
9th October 2013
Shelbourne Reynolds will be returning to Agritechnica, the worlds largest farm machinery show after a four year absence.
Shelbourne Reynolds Invests in More Product Support for 2014
12th November 2014
After working in a Field support role based out of the Colby office for 10 years Adam Whitaker has returned to the UK.
Long Service Awards 2013
15th August 2013
It’s that time again in the year to present the long service awards. No matter how long your length of service, all of our staff are essensial to us, however it’s still important to take a moment to recognise those employees that have been with us for many years and in some cases very many years and to take the opportunity to publicly thank them for all of their hard work, loyalty, dedication and contribution to the success of Shelbourne Reynolds over their years with us.
Tef Harvesting in South Africa
28th May 2013
Shelbourne Reynolds is now working closely with our new south African distributor D.A Tractors of Bergville, promoting our stripper head has brought the harvesting of a crop that dates back to 4000bc into the 21st century.
New High Torque Drive for RSD Strippers
22nd April 2013
As with all machines the preferred size of stripper header for rice is getting larger. With more and more hybrid rice being grown yields have also been steadily increasing in recent years.
Shelbourne Reynolds Introduces 8m Trimmer
14th November 2012
Latest development from Shelbourne Reynolds is the addition of a new 8m reach machine to the 700 Series Heavy Duty range. The new model is called the HD780T.
Royal Cornwall Show
3rd June 2013
Come and see us at the Royal Cornwall Show this week 6th, 7th and 8th June!
23rd May 2013
Come and see us next week at the Suffolk Show, Trinity Park, Ipswich.
Beef Expo - Festival of British Beef
14th May 2013
We will be exhibiting on Thursday 23rd May at the Beef Expo in Malvern.
USA Dealer Visit
26th March 2013
One of the coldest Monday’s of the year so far saw the arrival of 6 USA stripper header dealers at Heathrow airport.
Kevin's Hair Cut
7th March 2013
Kevin Bridges, our Sheetmetal supervisor who has worked at Shelbourne Reynolds for 28 years decided just before Christmas and after lots of peer pressure and banter from colleagues, to cut off his pony tail which he has been growing for as long as he has worked for the company.
Doe Show 2013
1st February 2013
Come and visit Shelbourne Reynolds at the 2013 Doe Show.
14th January 2013
Come and visit Shelbourne Reynolds at our LAMMA show stand B91.
Why cut when you can strip?
10th September 2012
Crops such as high-value grass seed used to be a staple ingredient in the rotations on many Essex arable farms. But, as production practices were modernised, grass seed began to give way to other crops that are possibly more straightforward to grow and harvest.
Farmers' ability to manage soil is key as climate fluctuates
8th August 2012
BROADVIEW — On an afternoon when the air presses against his face like a hot iron, Mitch Auer grabs a shovel from his pickup and lumbers into an old wheat stand that hasn’t seen 3 inches of moisture this year.
Powerspread Dairy gets makeover
3rd April 2012
Machines from the new 2012 Powerspread Dairy range are now starting to take to the fields in the UK. The Dairy has been the stalwart of the Powerspread (formerly Econ) range for 15 years and sales have continued to grow, however as always customer feedback has been encouraged and a number of updates installed.
Relay for Life 2012
28th May 2012
Shelbourne Reynolds is again taking part in the Cancer Research Relay for Life. Once again it will be held in the beautiful parkland of the National Trust’s Ickworth Estate, on the 23rd June.
Pleased with Stripper Headers
20th March 2012
The Ireland Brothers, of Martin, S.D., get more out of no-till by using stripper headers on their combines. With the Shelbourne Reynolds headers that strip wheat kernels out heads and leave the straw standing upright, they can operate combines at higher speeds and in tougher conditions than when using straight cut headers that put all the straw through the combine. That increases their combining capacity.
Doe Show 2012
27th January 2012
We look forward to see you at the Doe show.
New Trimmer Ranges for LAMMA 2012
9th December 2011
Shelbourne Reynolds is bringing its latest range of hedge and verge trimmers to LAMMA 2012, with the new 300 and 400 series models aimed at those users who want high level features for a lower investment. Buyers can opt for the fixed frame 300 series, which at present consists of the 5m reach 350 model, or the 450 model, a 5m model in the 400 power slew series.
US Farm Show Schedule 2012
9th December 2011
We look forward to you visiting us at the following shows in the coming year
11th November 2011
Now in its 9th year of production the Shelbourne Powerblade Hedge trimmer is going from strength to strength. Each year new customers and dealers in new areas are converted to the benefits of the machine. Shelbourne Reynolds has always paid very close attention to product and customer support, this stems back to the days of building pea viners and rape swathers where no â€śdown timeâ€ť was tolerated. This policy has been a popular approach in the ground care sector.
New Wider Stripper Headers on Trial
15th July 2011
Shelbourne Stripper headers like most other pieces of farm machinery have been getting steadily larger since their introduction in the early 1990â€™s.
â€˘ High capacity and output â€˘ Simple reliable drive system â€˘ Even spread up to 20m â€˘ Unique rotor control After the successful launch of the new Long Wheelbase Powerspread Pro 2400 and 3200 models, the same design criteria has been transferred to create the Short Wheelbase Pro range which replaces the long running 1600, 1800 and 2000 gallon Contractor range.
Spares Parts Support
13th April 2010
Shelbourne Reynolds Engineering parts department hold a very extensive range of parts including parts to cover machines...
Australian Wheat Harvest 2010
5th January 2011
Harvesting should now be coming to an end in Australia and most Australians would have been expecting that their main worry would be what to throw on the BBQ for Christmas.
Experience for the Future
21st October 2010
The design team at Shelbourne Reynolds has recently been strengthened by the addition of a University year placement student. Local student Stephen Aldis is currently in year 3 of his 4-year Engineering Design and Development course run at Harper Adams University College, Shropshire. Stephen comes from a family farming background in Bungay, Suffolk
Princess Royal Visits Dairy Event 2010
14th October 2010
Princess Royal officially opened the 2010 Dairy event at this years new venue of the NEC, Birmingham.
USA Wheat harvest update
23rd July 2010
Harvest is now 75% finished in Kansas and Colorado and moving steadily Northwards. Generally speaking yields have been very good this year with many dryland reports of 75 bu/acre.
2011 Royal Norfolk Show
23rd June 2011
Shelbourne Reynolds will this year be exhibiting at the Royal Norfolk Show on 29th & 30th June 2011.
Relay for Life 2010
6th July 2010
Team Shelbourne took part in a 21 hour relay for life in aid of Cancer Research at the weekend. The team was made up of colleagues and their families, this all went towards making a great atmosphere and having lots of fun and laughter.
Royal Cornwall Show 2011
2nd June 2011
Come and join us at the Royal Cornwall Show on 9th, 10th and 11th June 2011.
Royal Highland Show
17th June 2010
Come and visit Shelbourne Reynolds 24th - 27th June 2010 at the Royal Highland Show!
New Recruit - Matt Tomkinson
18th May 2010
Shelbourne Reynolds is pleased to announce the appointment of Matthew Tomkinson in the role of Product Support Representative.
Shelbourne Reynolds introduces two new manure spreaders
11th March 2010
Shelbourne Reynolds has updated its range of side-delivery manure spreaders with the introduction of two new models to the Powerspread range.
New â€śin cabâ€ť hydraulic conveyor speed control released for Powermix Express range
11th March 2010
The Powermix Pro express conveyor has been an industry leader for sometime. The Patented system...
2009 Rice harvest is finally coming to a close
1st December 2009
The 2009 rice harvest is finally coming to a close, most years harvest starts in August and has tailed off by mid October, this year there will still be rice being cut at Thanksgiving.
Shelbourne Launch Two Rear Door Powermix Pro
4th November 2009
The latest addition to the Shelbourne Powermix Mixer Wagon range is the two rear door single auger Powermix Popular.
Relay for Life for Cancer Research
23rd March 2010
Shelbourne Reynolds staff are taking part in the 21 hour Relay for Life on Saturday 03 Jul 2010 at.......
Rice Harvest Update
13th October 2009
The 2008 rice harvest is coming to an end in both the Mississippi River Delta and California with only a few producers still harvesting.
New Cubicle Bedder Range Launched
8th September 2009
Based upon the experiences learnt over the past 4 years of cubicle bedder production Shelbourne Reynolds is pleased to announce the latest models due for release in October 2008.
One of the issues facing most Dairy Managers in the UK today is trying to quickly and efficiently feed large numbers of cattle spread located in numerous older buildings often on split sites.
Royal Highland Show 2011
15th June 2011
Shelbourne Reynolds will be exhibiting at this years Royal Highland Show which will be held on 23rd - 26th June 2011 in Edinburgh.
Suffolk Show 2011
18th May 2011
Shelbourne Reynolds are pleased to announce that we will be exhibiting at this years Suffolk Show at Trinity Park, Ipswich.
Grassland and Muck 2011
27th April 2011
Shelbourne Reynolds will be exhibiting at this years Grassland and Muck show on 18th and 19th May 2011.
Agri Expo 2011
23rd February 2011
Shelbourne Reynolds will this year be exhibiting at the Agri Expo at Kent County Showground in Maidston on Tuesday 1st March 2011.
5th January 2011
We will be exhibiting at LAMMA 2011 on 19th and 20th January 2011.
South West Beef Show 2010
24th September 2010
We will be exhibiting a Powermix Express and Cubicle Bedder 300 at this years South West Beef show.
Dairy Show 2010
29th September 2010
Come and visit us at the Dairy Show on Wednesday 6th October 2010.
Dairy Event and Livestock Show 2010
26th August 2010
Come and visit us at the Dairy Event and Livestock show at the NEC, Birmingham on 7th and 8th September.
Royal Welsh Show 2010
7th July 2010
Come and visit Shelbourne Reynolds at the Royal Welsh Show 19th-22nd July 2010 in Powys.
2010 Cereals Event
3rd June 2010
Come and visit Shelbourne Reynolds at the 2010 Cereals Event on 9th and 10th June, Stand Number 279.
Royal Cornwall Show 2010
3rd June 2010
Come and visit Shelbourne Reynolds at this years Royal Cornwall Show on 10th, 11th and 12th June 2010.
4th May 2010
Visit Shelbourne Reynolds at the 2010 Scotgrass show on 11th May 2010.
Shelbourne Reynolds will be exhibiting at the Dairy Technology Event on Wednesday 5th May 2010at the Harper Adams University College in Shropshire.
Shelbourne Reynolds is Exhibiting @ the Doe Show 2010
27th January 2010
Visit Shelbourne Reynolds at the Doe Show on the 2nd, 3rd & 4th February.
Lamma Show 20th & 21st January 2010
19th January 2010
Visit us at the Lamma show, stand number B88 Avenue V. Newark Showground 20th & 21st January 2010.
Kansas Wheat Harvest Update
8th July 2009
The Southern US wheat belt harvest is now almost complete with machines now running in the Dakotaâ€™s. Yields and crop harvesting conditions were tremendously variable this year. Drought took its toll and reduced yields in Texas and South West Kansas as well as some parts of Colorado.
Powerblade Wins at Sussex Competition
8th June 2009
The bi-annual NAAC Sussex group Hedge Cutting competition saw Shelbourne Powerblade machines take 3 out of the 4 top places. A total of 10 competitors running a combination of Bomford, McConnel, Spearhead, Orsi and Shelbourne machines entered this year.
New Medium Duty (MD) Trimmer Range
27th May 2009
The all new Medium Duty (MD) range of Powerblade hedge and verge trimmers has been designed by dealer and customer demand.
New Variable forward reach Trimmer model
12th May 2009
The new 6m powerblade VFR is the only Trimmer currently available with a variable forward reach and digital proportional electronic control.
Launch of Powermix Pro Series Feeder Wagon
15th April 2009
The new Powermix Pro series is the result of 12 yearsâ€™ intensive testing throughout the UK and is, as such, the only diet feeder to be developed specifically for operation in UK conditions.
Powerblade range with new booms and controls
11th March 2009
Powerblade updates for the 2006 season include new boom geometry and a new digital proportional control system.
Shelbourne Improves Powerblade Head for 2005
19th November 2008
Innovation has always been the keyword with Shelbourne Reynolds since the introduction of the Powerblade range of hedge and verge trimmers.