Sitemap

Shelbourne Reynolds
Engineering Ltd.

Shepherds Grove
Stanton
Bury St Edmunds
Suffolk
IP31 2AR
England

Tel:
Fax:

+44 (0) 1359 250415
+44 (0) 1359 250464

Shelbourne Reynolds Inc.

1250 South Country Club Drive
P.O. Box 607
Colby, Kansas 67701
USA

Tel:
Fax:

(785) 462-6299
(785) 462-6761

Enquiry Form>

Ground Care » Powerblade Hedge Cutter

Heavy Duty Range

printable page

The Shelbourne Powerblade range of Heavy Duty hedge and verge trimmers is available in 5.5m, 6.0m and 7m boom sizes.  A range of specifications and configurations  make it suitable for both farmers and contractors. The 5.5m machine is only available as a fixed boom model and the 6.0m and 7m models are telescopic only. The 6m machine is also available in variable forward reach configuration
 
 

 HD70T
     

 HD55 Model
The HD55 is a fixed boom 5.5m extension machine aimed specifically at verge mowing contractors.  This model has the same inner boom and geometry of the popular HD70 model. The robust design and centre mounted head make the machine ideal for demanding contracting work.  As with all HD models the oil cooler is integrated into the top of the tank and both well positioned for functionality as well as being reasonably protected against falling debris. The popular option with the HD55 would be the Electronic Active Float System (AFS), this gives instant pressure sensing at the head roller for maximum verge mowing speed , efficiency and operator ease.
    

HD60T Model
The HD60T model is equipped with a standard telescopic boom which gives 1.2m of telescopic advantage.  This means that the machine is a remarkably compact 4.8m machine when retracted, telescoping out to 6m. The HD60T is a very versatile Contractors machine that is compact enough to be used on narrow lanes and yet also has the reach for large hedges.

  
    
 

 HD70T Model 

The HD70T is designed primarily for Contractors. The machine is flexible between 5.5m and 7.0m using a 1.5m telescopic ram. This large telescopic capacity means that the machine is reasonably compact yet also suitable for long reach work. The heavy duty build means that the HD70T weighs 1750kg which means that axle bracket mounting will be necessary on all except the largest tractors.
    

HD62VFR Model
The HD62VFR has been added to the range by popular demand. This machine provides the strength, durability and performance of the HD range with the ease of operation of a mid mount machine. The secondary boom pivot point is close to the cutting head which means that the machine only loses 200mm of reach when the head is moved forward. Maximum reach is 6.2m with the machine fully extended out and 6m with the head fully extended forwards. The significant 1.5m of forward reach is enough to bring the head alongside the operator on even the largest cab forward modern tractors. the forward reach is variable between 0 and 1.5m. Standard controls are the digital proportional joystick.

  
 

Visibility and operator comfort are critical for professional users.