Maintenance & Oil Levels
Recommended Maintenance and type of oil & oil levels
Shelbourne Reynolds recommends using Mobil Oil, fully synthetic 75/90w. Oil should be replaced annually, new machines should have the oil replaced after the first 20 hours.
CX/RX Heads:
|
Gearbox |
Capacity |
|
Dropbox |
1.32 Quarts |
|
Five Speed |
1.32 Quarts |
|
Rotor Box |
1.59 Quarts |
Grease the PTO cross joints at 10 hour intervals. Grease the rotor end bearings, centre ball coupling, crop deflector arm bushes & top hood bushes every 50 hours.
Seasonal Maintenance:
Clean machine, remove auger inspection covers & clean out, check auger finger wear, check seals on gearbox, check auger clutch, sprockets & chains, remove panel from rotor & clean out inside rotor, check shafts & rotor bearings for wear.
CVS/RVS/RSD Heads:
|
Gearbox |
Capacity |
|
Input Gearbox |
0.79 Quarts |
|
Rotor Gearbox |
1 Quarts |
|
Rotor Box |
1.59 Quarts |
Grease the PTO cross joints & the front & rear pulley sheaves at 10 hour intervals, after greasing the pulley sheaves run the variable speed from its slowest speed to its fastest speed to prevent pulleys from sticking. Grease the rotor end bearings, centre ball coupling, LH end ball coupling, crop deflector arm bushes & top hood bushes every 50 hours.
Seasonal Maintenance:
Clean machine, remove auger inspection covers & clean out, check auger finger wear, check seals on gearbox, check auger clutch, sprockets & chains, remove panel from rotor & clean out inside rotor, check shafts & rotor bearings for wear.