Models are available from 16 to 30 cubic metres with either single or tandem axles and 22m³, 24m³ & 30m³ with tandem axles only. All models feature the centre mounted “Express” conveyor that will elevate to either side of the machine.

Powermix Plus 16M³

The 16m³ Powermix Plus is a compact twin auger diet feeder available in both single and tandem sprung axle configurations, it has a capacity of approximately 8000kg depending upon the dry matter of the feed. It is a short coupled machine able to navigate around tight buildings and requires a 115HP tractor.

The front mounted express conveyor is standard which allows feed to be elevated to either side of the machine to a height of 1.5m. Single axle and tandem sprung axle versions are available. A centre mounted rear door is optional.

Standard Features

Smooth scrolled auger flighting for greater wear resistance and lower power requirement
12.5mm thick S500 lower tub wall
15mm thick S500 auger
Removable auger wear plates
Front mounted ladder and viewing platform
Rear LED road lights
Front mounted scale can be viewed from both sides
Steel straw ring
Smooth tub shape for faster bale processing and mixing
3 x 90mm load cells
Hydraulic brakes
Direct Coupled hydraulics
2 speed gearbox with manual control
Standard Single axle tyres: 435/50 R19.5
Standard Tandem axle tyres: 385/55 R22.5

Powermix Plus 18M³

The 18m³ Powermix Plus is a compact twin auger diet feeder available in both single and sprung tandem axle configurations, it has a capacity of approximately 9000kg depending upon the dry matter of the feed. It is a short coupled single axle machine able to navigate around tight buildings and requires a 120HP tractor.

The front mounted express conveyor is standard which allows feed to be elevated to either side of the machine to a height of 1.5m. Single axle and tandem sprung axle versions are available. A centre mounted rear door is optional.

Standard Features

Smooth scrolled auger flighting for greater wear resistance and lower power requirement
12.5mm thick S500 lower tub wall
15mm thick S500 auger
Removable auger wear plates
Front mounted ladder and viewing platform
Rear LED road lights
Front mounted scale can be viewed from both sides
Steel straw ring
Smooth tub shape for faster bale processing and mixing
3 x 90mm load cells
Hydraulic brakes
Direct Coupled hydraulics
2 speed gearbox with manual control
Standard Single axle tyres: 435/50 R19.5
Standard Tandem axle tyres: 385/55 R22.5

Powermix Plus 20M³

The 20m³ Powermix Plus is a compact twin auger diet feeder available in both single and sprung tandem axle configurations, it has a capacity of approximately 10,000kg depending upon the dry matter of the feed. It is a short coupled machine able to navigate around tight buildings and requires a 125HP tractor.

The front mounted express conveyor is standard which allows feed to be elevated to either side of the machine to a height of 1.5m. Single axle and tandem sprung axle versions are available. A centre mounted rear door is optional.

Standard Features

Standard Features:
Smooth scrolled auger flighting for greater wear resistance and lower power requirement
12.5mm thick S500 lower tub wall
15mm thick S500 auger
Removable auger wear plates
Front mounted ladder and viewing platform
Rear LED road lights
Front mounted scale can be viewed from both sides
Steel straw ring
Smooth tub shape for faster bale processing and mixing
3 x 90mm load cells
Hydraulic brakes
Direct Coupled hydraulics
2 speed gearbox with manual control
Standard Single axle tyres: 435/50 R19.5
Standard Tandem axle tyres: 385/55 R22.5

Powermix Plus 22M³

The 22m³ Powermix Plus is a compact twin auger diet feeder available in a sprung tandem axle configuration, it has a capacity of approximately 11,000kg depending upon the dry matter of the feed. It is a short coupled machine able to navigate around tight buildings and requires a 130HP tractor.

The front mounted express conveyor is standard which allows feed to be elevated to either side of the machine to a height of 1.5m. Single axle and tandem sprung axle versions are available. A centre mounted rear door is optional.

Standard Features

Smooth scrolled auger flighting for greater wear resistance and lower power requirement
12.5mm thick S500 lower tub wall
15mm thick S500 auger
Removable auger wear plates
Front mounted ladder and viewing platform
Rear LED road lights
Front mounted scale can be viewed from both sides
Steel straw ring
Smooth tub shape for faster bale processing and mixing
3 x 90mm load cells
Hydraulic brakes
Direct Coupled hydraulics
2 speed gearbox with manual control
Standard Single axle tyres: 435/50 R19.5
Standard Tandem axle tyres: 385/55 R22.5

Powermix Plus 24M³

The 24m³ Powermix Plus is a compact twin auger diet feeder available in a sprung tandem axle configuration, it has a capacity of approximately 12,000kg depending upon the dry matter of the feed. Its overall size remains compact with its height of 3m and max width of 2.8m at the top of the tub. The tractor requirement would be from  130HP.

Dispensing is taken care of by a new webbing conveyor system incorporating increased roller diameters and uprated food-grade belting. The new conveyor is 800mm wide and, coupled with a larger door, has been designed to allow significantly faster feedout rates, particularly when feeding fresh grass in zero grazing systems.

 

Standard Features

Stepped design auger with 15mm stainless steel edging for improved mixing & durability
Replaceable lower tub liner sections
Replaceable auger wear plates
Front mounted ladder and viewing platform
Rear LED road lights
Front mounted scale can be viewed from both sides
Steel straw ring
Smooth tub shape for faster bale processing and mixing
6 x load cells
Hydraulic brakes
Direct Coupled hydraulics
2 speed gearbox with manual control
Steel mudguards
Standard tyres: 435/50 R19.5

Powermix Plus 30M³

The 30m³ Powermix Plus is a compact twin auger diet feeder available in a sprung tandem axle configuration, it has a capacity of approximately 15,000kg depending upon the dry matter of the feed. Its overall size remains compact with its height of 3.5m and max width of 2.8m at the top of the tub. The tractor requirement would be from  160HP.

Dispensing is taken care of by a new webbing conveyor system incorporating increased roller diameters and uprated food-grade belting. The new conveyor is 800mm wide and, coupled with a larger door, has been designed to allow significantly faster feedout rates, particularly when feeding fresh grass in zero grazing systems.

Standard Features

Stepped design auger with 15mm stainless steel edging for improved mixing & durability
Replaceable lower tub liner sections
Replaceable auger wear plates
Front mounted ladder and viewing platform
Rear LED road lights
Front mounted scale can be viewed from both sides
Steel straw ring
Smooth tub shape for faster bale processing and mixing
6 x load cells
Hydraulic brakes
Direct Coupled hydraulics
2 speed gearbox with manual control
Steel mudguards
Standard tyres: 435/50 R19.5

Powermix Plus 3D View

0%

    Powermix Plus Options

    Electric Hydraulic Control With Vari-Speed Conveyor Read more Wireless Electric Hydraulic Control With Vari-Speed Conveyor and 2 speed control Read more Electric 2 speed control To change gearbox speed (Hi & Low) For direct coupled hydraulics Read more Centre Rear door To Allow feeding / discharge at the rear of the tub Read more Tungsten blades To help maintain a sharp edge Read more DG-400 Basic Scale DG-400 Basic scale for the purpose to read and display weight. Read more DG-600 Programmable Scale DG-400 Basic scale for the purpose to read and display weight. Read more DG-Remote Zero (DG400/600) Remote control for scale via the tractor or handler Read more DG-Dina Tel Wireless Remote Display (DG600only) Wireless display that can be mounted in the tractor or handler Read more Wired Remote scale head (DG400/600) Additional display Read more GPRS- Data Transfer kit (DG600) Allows transfer of data automatically without the use of a USB data key Read more Bluetooth Phone scale modem (DG600) Allows the scale display on a Bluetooth device Read more External scale Power Pack External power source when loading mixer without power ie no tractor coupled Read more Tandem Axle Air Brakes The air-brake system improves the braking efficiency. hydraulic brake can allow be used if the tractor is not equipped. Read more Steering Axle with Hydraulic Brakes Steering rear axle allows for greater maneuverability. The hydraulic brakes are powered via the tractor hydraulic braking system. Read more Steering Axle with Air Brakes Steering rear axle allows for greater maneuverability. The air-brake system improves the braking efficiency. hydraulic brake can allow be used if the tractor is not equipped. Read more Wide Angle PTO Allows the pto to be used whilst tractor is turning on a gentle radius. Read more 385/55 R19.5 Low Profile Tandem Axle Tyre Option Tandem axle tyre option Read more 435/50 R19.5 Floatation Tandem axle tyre option Read more 18R 22.5 High Clearance Single axle tyre option Read more 235/75 R17.5 Duel wheel Low profile option for single axle machines Read more Auger magnet To prevent feeding out metal objects that could be present within the feed. Read more

    Need Some Advice? We are happy to help

    If you have questions or require advice about the Powermix Plus Compact, or any of our other products, then contact us today.

    +44 (0) 1359 250415 Send enquiry

    STANDARD FEATURES - POWERMIX PLUS

    1
    2
    3
    4
    5
    6
    7
    8
    1. Rounded Tub Shape for faster bale processing

    The new shape promotes the live mix of the ration and speeds up processing time.

    2. Replaceable auger wear pads

    To aid the replacement of wearing parts.

    3. Smooth scrolled auger flighting

    To aid with positive mix keeping the material live whilst reducing wear.

    4. 12.5mm thick S-500 sidewall

    To provide longevity to the tub.

    5. Front mounted ladder and platform

    The front ladder / platform allows the operator to asses the level of mix and to add small quantities of supplements.

    6. Front mounted Express conveyor system

    The conveyor position and feed rate can easily be adjusted from the cab whilst feeding out with either control system.

    7. Auto conveyor tensioning system

    To aid belt tension and reduce belt wear.

    8. Conveyor elevates up to 5’5” to both sides of the machine

    Giving the ability to feed into high feed troughs.

    TECHNICAL DATA

    Stndard Features16m³18m³20m³
    Capacity / Level8000kg*9000kg*10000kg*
    Volume / Level16m³18m³20m³
    Tyre Size435/55R19.5435/55R19.5435/55R19.5
    Axle TypeSingleSingelSingel
    PTO Speed540rpm540rpm540rpm
    HP Required110120130
    Unladen Weight7648kg7680kg7864kg
    Door ConfigurationFront CentreFront CentreFront Centre
    Door OperationHydraulicHydraulicHydraulic
    Hydraulic BrakesSTDSTDSTD
    LED LightsSTDSTDSTD
    Adjustable Corner KnivesSTDSTDSTD
    Steel Straw RingSTDSTDSTD
    Hydraulic ControlDirect via TractorDirect via TractorDirect via Tractor
    Number of Load Cells333
    Number of Augers222
    Number of Blades141414
    Two Speed GearboxSTDSTDSTD
    Auger MagnetSTDSTDSTD
    Elevating ConveyorSTDSTDSTD
    Fixed Front ConveyorN/AN/AN/A
    Options
    Electric Control with Vari Speed Conveyor / 2 speed changeOPTOPTOPT
    Wireless Electric Control with Vari Speed Conveyor / 2 Speed ChangeOPTOPTOPT
    Manual Hyd Valve ControlOPTOPTOPT
    DG400 Basic Scale SystemOPTOPTOPT
    DG600 Prog. Scale SystemOPTOPTOPT
    DG Remote ZeroOPTOPTOPT
    DG GPRS Data Transfer KitOPTOPTOPT
    Remote Scale HeadOPTOPTOPT
    Battery Pack for ScaleOPTOPTOPT
    Wide Angle PTOOPTOPTOPT
    Tungsten BladesOPTOPTOPT
    Rear Centre DoorOPTOPTOPT
    Corner Rear Door (LH)N/AN/AN/A
    Air BrakesOPTOPTOPT
    Steering Axle with Hydrauilc BrakesOPTOPTOPT
    Steering Axle with Air BrakesOPTOPTOPT
    * Depending Upon Feed DM%
    Stndard Features16m³18m³20m³22m³
    Capacity / Level8000kg*9000kg*10000kg*11000kg*
    Volume / Level16m³18m³20m³22m³
    Tyre Size385/55R22.5385/55R22.5385/55R22.5385/55R22.5
    Axle TypeTandemTandemTandemTandem
    PTO Speed540rpm540rpm540rpm540rpm
    HP Required110120130140
    Unladen Weight8308kg8340kg8524kg8637kg
    Door ConfigurationFront CentreFront CentreFront CentreFron Centre
    Door OperationHydraulicHydraulicHydraulicHydraulic
    Hydraulic BrakesSTDSTDSTDSTD
    LED LightsSTDSTDSTDSTD
    Adjustable Corner KnivesSTDSTDSTDSTD
    Steel Straw RingSTDSTDSTDSTD
    Hydraulic ControlDirect via TractorDirect via TractorDirect via TractorDirect via Tractor
    Number of Load Cells3333
    Number of Augers2222
    Number of Blades14141414
    Two Speed GearboxSTDSTDSTDSTD
    Auger MagnetSTDSTDSTDSTD
    Elevating ConveyorSTDSTDSTDSTD
    Fixed Front ConveyorN/AN/AN/AN/A
    Options
    Electric Control with Vari Speed Conveyor / 2 speed changeOPTOPTOPTOPT
    Wireless Electric Control with Vari Speed Conveyor / 2 Speed ChangeOPTOPTOPTOPT
    Manual Hyd Valve ControlOPTOPTOPTOPT
    DG400 Basic Scale SystemOPTOPTOPTOPT
    DG600 Prog. Scale SystemOPTOPTOPTOPT
    DG Remote ZeroOPTOPTOPTOPT
    DG GPRS Data Transfer KitOPTOPTOPTOPT
    Remote Scale HeadOPTOPTOPTOPT
    Battery Pack for ScaleOPTOPTOPTOPT
    Wide Angle PTOOPTOPTOPTOPT
    Tungsten BladesOPTOPTOPTOPT
    Rear Centre DoorOPTOPTOPTOPT
    Corner Rear Door (LH)OPTN/AN/AN/A
    Air BrakesOPTOPTOPTOPT
    Steering Axle with Hydrauilc BrakesOPTOPTOPTOPT
    Steering Axle with Air BrakesOPTOPTOPTOPT
    * Depending Upon Feed DM%
    Enlarge
    ModelABCDEFGHWeight
    16m³ 435/50 R19.52380mm / 7'10"2730mm / 9'7355mm / 24'2"2810mm / 9'3"1450mm / 4'9"463mm / 1'6"5100mm / 16'9"2138mm 7'0"7648kg
    16m³ 385/65 R22.52380mm / 7'10"2730mm / 9'7355mm / 24'2"2945mm / 9'8"1585mm / 5'2"489mm / 1'7"5100mm / 16'9"2086mm 6'10"7648kg
    16m³ 235/75 R17.52380mm / 7'10"2730mm / 9'7355mm / 24'2"2730mm / 9'0"1370mm / 4'6"402mm / 1'4"5100mm / 16'9"2260mm 7'5"7648kg
    18m³ 435/50 R19.52380mm / 7'10"2730mm / 9'7355mm / 24'2"2945mm / 9'8"1450mm / 4'9"463mm / 1'6"5100mm / 16'9"2138mm 7'0"7680kg
    18m³ 385/65 R22.52380mm / 7'10"2730mm / 9'7355mm / 24'2"3080mm / 10'1"1585mm / 5'2"489mm / 1'7"5100mm / 16'9"2086mm 6'10"7680kg
    18m³ 235/75 R17.52380mm / 7'10"2730mm / 9'7355mm / 24'2"2865mm / 9'5"1370mm / 4'6"402mm / 1'4"5100mm / 16'9"2260mm 7'5"7680kg
    20m³ 435/50 R19.52380mm / 7'10"2730mm / 9'7355mm / 24'2"3135mm / 10'3"1450mm / 4'9"463mm / 1'6"5100mm / 16'9"2138mm 7'0"7864kg
    20m³ 385/65 R22.52380mm / 7'10"2730mm / 9'7355mm / 24'2"3270mm / 10'9"1585mm / 5'2"489mm / 1'7"5100mm / 16'9"2086mm 6'10"7864kg
    20m³ 235/75 R17.52380mm / 7'10"2730mm / 9'7355mm / 24'2"3055mm / 10'0"1370mm / 4'6"402mm / 1'4"5100mm / 16'9"2260mm 7'5"7864kg
    Enlarge
    ModelABCDEFGHWeight
    16m³ 385/55 R22.52380mm / 7'10"2730mm / 9'7355mm / 24'2"2925mm / 9'7"1565mm / 5'2"489mm / 1'7"5100mm / 16'9"2086mm 6'10"8308kg
    16m³ 385/55 R19.52380mm / 7'10"2730mm / 9'7355mm / 24'2"2862mm / 9'5"1502mm / 4'11"489mm / 1'7"5100mm / 16'9"2086mm 6'10"8308kg
    18m³ 385/55 R22.52380mm / 7'10"2730mm / 9'7355mm / 24'2"3060mm / 10'1/2"1565mm / 5'2"489mm / 1'7"5100mm / 16'9"2086mm 6'10"8340kg
    18m³ 385/55 R19.52380mm / 7'10"2730mm / 9'7355mm / 24'2"2997mm / 9'10"1502mm / 4'11"489mm / 1'7"5100mm / 16'9"2086mm 6'10"8340kg
    20m³ 385/55 R22.52380mm / 7'10"2730mm / 9'7355mm / 24'2"3250mm / 10'8"1565mm / 5'2"489mm / 1'7"5100mm / 16'9"2086mm 6'10"8524kg
    20m³ 385/55 R19.52380mm / 7'10"2730mm / 9'7355mm / 24'2"3187mm / 10'6"1502mm / 4'11"489mm / 1'7"5100mm / 16'9"2086mm 6'10"8524kg
    22m³ 385/55 R22.52380mm / 7'10"2730mm / 9'7355mm / 24'2"3428mm / 11'3"1565mm / 5'2"489mm / 1'7"5100mm / 16'9"2086mm 6'10"8673kg
    22m³ 385/55 R19.52380mm / 7'10"2730mm / 9'7355mm / 24'2"3365mm / 11'1/2"1502mm / 4'11"489mm / 1'7"5100mm / 16'9"2086mm 6'10"8673kg

    Support & Guides

    Frequently Asked Questions

    Yes the Powermix Mixer Feeder has a sealed tub that allows water to be added to dry ingredients and high levels of liquid feeds to added to mixes.

    Yes the powermix Feeder Wagon will take whole big bales of hay, straw and silage and chop them down to produce a mix.

    Yes the feed out options on a Powermix Epress & Plus Feeder Wagon gives several options for feeding over high barriers. up to 5’5″

    Yes, the machine should be operated in high gear with a 1000rpm tractor pto input and the three legs on the bottom of each auger will easily mix the smallest of rations

    Yes, there are a number of different scale options that allow you to store rations as well as download data between the office PC and mixer scale

    Yes, The powermix Mixer Feeder can be supplied with an independent power pack to run the diet computer and can be hitched up and started once your ingredients have been loaded.

    You can find your local dealer by using our dealer search here or we can put you in touch with a dealer by contacting us here