656 Hedge Cutter

The 656 trimmer is fitted with a fixed boom giving a maximum reach of 5.60M. Suited to operations such as verge mowing or when operating on medium sized tractors where overall weight is critical.

Many of the features have come directly from the larger trimmers such as the 70hp hydraulic system and the HD 1.2M head therefore making the model suited both to the farmer and contactor.

Standard Features

70HP hydraulic system
Parallel boom geometry
Digital Proportional Joystick
Bi-Directional belt drive 1.2M head
Heavy duty 4 point stabilizer frame
Bolted adjustable head roller
Cable controls
Cable control rotor drive
LED lights
Parking stands / forklift shoes

660T Hedge Cutter

The 660T is a telescopic machine with a retracted reach of 4.80M and a maximum reach of 6.0M when fully extended. This gives the trimmer a compact design without comprise to its reach and therefore is ideal for narrow lane work.
Many of the features have come directly from the larger trimmers such as the 70hp hydraulic system and the HD 1.2M head therefore making the model suited both to the farmer and contactor.

Standard Features

70HP hydraulic system
Parallel boom geometry
Digital Proportional Joystick
Bi-Directional belt drive 1.2M head
Heavy duty 4 point stabilizer frame
Bolted adjustable head roller
Cable controls
Cable control rotor drive
LED lights
Parking stands / forklift shoes

660T 3D View

0%

    Optional Features

    Oil Cooler Thermostatically controlled to prevent oil from becoming over-heated, improve performance and prolong oil life Read more Electric Arm & Head Float Available with the Digital Proportional joystick
    Both the Arm & Head float can be operated via the joystick box in cab
    Read more
    Twin Accumulator Float This adds a second accumulator to the standard single accumulator float to give greater adjustment Read more Hydraulic Roller This allows the position of the head roller to be controlled hydraulically using the tractors spool valve Read more Hydraulic Nose Available on both 1.2m and 1.5m heads and is hydraulically adjustable using the tractor spool valve allowing enhanced material flow for larger growth Read more Narrow Lane Bracket This enables the operator to tilt the head hydraulically using a tractor spool valve to enable vertical hedge side trimming in restricted areas Read more 600 Series Highway Kit This incorporates a reflective chevron graphics package, magnetic arrow for maximum highway visibility Read more Debris Blower A tractor spool valve operated hydraulic fan used for blowing hedge cuttings off of a hard smooth surface Read more Verge Head Kit Incorporates re-enforced hardened steel skid and larger 6” diameter roller Read more 1.5m Flail Head Available in lieu of the standard 1.2m flail head, the 1.5m head features 30 flails Read more Axle Mounting Sub Frame This detachable frame connects the trimmer to the axle brackets on the tractor. It connects to the trimmer main frame using two pins Read more Axle Brackets A range of axle brackets are available to fit most modern tractors Read more

    Need Some Advice? We are happy to help

    If you have questions or require advice about the 600 Series Hedge Cutter, or any of our other products, then contact us today.

    +44 (0) 1359 250415 Send enquiry

    STANDARD FEATURES - 600 SERIES

    1
    2
    3
    4
    5
    6
    1. Heavy Duty 4 Point Linkage Stabiliser Frame

    This is an adjustable frame that helps to stabilize the offset weight of a trimmer when fitted to the tractors 3 point linkage. A drawbar stabilizer is also included as an additional link to the 3 point.

    2. 1.2M HD Belt Drive Head

    The standard 1.2M head can be fitted with either an inboard or outboard drive.

    3. 70HP High Power Hydraulic System

    The 70hp system runs with high oil pressure with a low flow rate which equates to constant power to the flail.

    4. Parking Stands / Fork Lift Shoes

    The parking stands provide good stability when the trimmer is statically parked.
    The fork lift brackets allow to easy movement of the trimmer when not attached to a tractor.

    5. Digital Proportional Joystick

    Programmable controls giving proportional control over both lift & reach functions, then switched electric on head angle and slew. This enables the operator to adjust the controls to their personal preference

    6. LED Lights

    Full LED lights provide longevity & good visibility to oncoming traffic.

    TECHNICAL DATA

    Technical Specifications656660T
    Controls
    Proportional Joystick ControlStandardStandard
    Hydraulics
    Oil Capacity230 litres230 litres
    Independent HydraulicsStandardStandard
    Oil CoolerOptionalOptional
    Arm Features
    Parallel Boom GeometryStandardStandard
    Boom TypeFixedFixed
    Hydraulic Slew90deg90deg
    Arm Break BackStandardStandard
    Head FloatOptionalOptional
    Arm FloatOptionalOptional
    Flailhead Features
    Twin 'v' Belt Head SystemStandardStandard
    1.2m HeadStandardStandard
    1.5m HeadOptionalOptional
    Drive System Flow100 l/min100 l/min
    Drive System Pressure250 bar250 bar
    Head Angling240deg240deg
    Roller Diameter125mm125mm
    Hydraulic RollerOptionalOptional
    Weights
    Machine Weight inc Head & Oil1550kg1650kg
    Min Tractor Weight3500kg3500kg
    Min Tractor90HP95HP
    Mounting System
    4pt MountingStandardStandard
    Axle MountingOptionalOptional
    Accessories
    Road LightsStandardStandard
    Warning: It is the customers responsibility to ensure that they do not exceed the tractor OEM (original equipment manufacturers) specification for implement mounting and hitch capability and that the trimmer installation is technically appropriate based on the weight and size of the tractor and its implement attachment system.
    REACH DIMENSIONS656660T
    RetractedExtended
    Max reach (A) head horizontal5.78mt5mt6.25mt
    Max reach (B) head vertical5.43mt4.81mt5.96mt
    Max height (C) head vertical6.48mt6.17mt7.04mt
    Max height (D) head horizontal5.63mt5.01mt5.87mt
    Max reach (E) downwards4.05mt3.05mt4.13mt
    Max reach (F) at 45degree up5.94mt4.88mt6.10mt
    Min siding width (G) to tank2.34mt2.34mtN/R
    Min siding width (H) to centre1.38mt1.38mtN/R
    Height (I) to pivot1.55mt1.55mt1.55mt
    All dimensions above with 1.2mt head (RH) Inboard drive

    Support & Guides

    Frequently Asked Questions

    All 600 machines can be either 3 point linkage or axle mounted but are not dedicated either way.

    Yes, the flails are arranged in a double spiral which gives a better cut finish and ejects significantly less debris to the side

    The standard system produces 70HP using Shelbourne high pressure hydraulic system on all 600.700 & 800 Series, an 85HP hydraulic system is optional extra

    All 600 series machines are specified with durable drop forged flails as standard, these are available in either “T” or Competition configuration