The range is available in sizes of 1800 & 2300 gallons in the short wheelbase format and then 2400 & 3200 gallons in the long wheelbase format. The range is designed to suit a wide range of farm, contractor and commercial waste disposal applications.

Powerspread Pro 1800

The Powerspread Pro 1800 has the capacity of 1800 gallons (8m³) and available in the short wheelbase format. The horsepower requirement is from 100hp.

The full length auger rotates at 13RPM and brings the material from the front and rear of the machine to the centrally mounted discharge rotor. The hydraulically operated door opens vertically which utilizes the complete width of the discharge rotor.

The discharge rotor works at 700 RPM in an overshot direction which allows the Hardox door to act as a shear bar to fragment the material before spreading in an arc away from the side of the machine.

Standard Features

Hydraulic operated side door
Hydraulically operated anti bridging arm
Reversible auger
Shearbolt protection for the auger, discharge rotor and auger paddles
Wide angle PTO
Hydraulic drop down rotor
Front & Rear Slurry Canopy
Adjustable slurry deflector
Rotor drip tray
Reversible Hardox rotor wear plates
Hydraulic Brakes
Rear Ladder
Tyres – 620/75 R26
LED Road Lights

Powerspread Pro 2300

The Powerspread Pro 2300 has the capacity of 2300 gallons (10.5m³) and available in the short wheelbase format. The horsepower requirement is from 110hp.

The full length auger rotates at 13RPM and brings the material from the front and rear of the machine to the centrally mounted discharge rotor. The hydraulically operated door opens vertically which utilizes the complete width of the discharge rotor.

The discharge rotor works at 700 RPM in an overshot direction which allows the Hardox door to act as a shear bar to fragment the material before spreading in an arc away from the side of the machine.

Standard Features

Hydraulic operated side door
Hydraulically operated anti bridging arm
Reversible auger
Shearbolt protection for the auger, discharge rotor and auger paddles
Wide angle PTO
Hydraulic drop down rotor
Front & Rear Slurry Canopy
Adjustable slurry deflector
Rotor drip tray
Reversible Hardox rotor wear plates
Wooden side extension
Hydraulic Brakes
Rear Ladder
Tyres – 620/75 R26
LED Road Lights

Powerspread Pro 2400

The Powerspread Pro 2400 has the capacity of 2400 gallons (11m³) and available in the long wheelbase format. The horsepower requirement is from 120hp.

The full length auger rotates at 13RPM and brings the material from the front and rear of the machine to the centrally mounted discharge rotor. The hydraulically operated door opens vertically which utilizes the complete width of the discharge rotor.

The discharge rotor works at 700 RPM in an overshot direction which allows the Hardox door to act as a shear bar to fragment the material before spreading in an arc away from the side of the machine.

Standard Features

Hydraulic operated side door
Hydraulically operated anti bridging arm
Reversible auger
Shearbolt protection for the auger, discharge rotor and auger paddles
Wide angle PTO
Hydraulic drop down rotor
Front & Rear Slurry Canopy
Adjustable slurry deflector
Rotor drip tray
Reversible Hardox rotor wear plates
Hydraulic Brakes
Rear ladder
Tyres – 650/65 R30.5
LED Road Lights

Prowerspread Pro 2400 Tandem Axle

The Powerspread Pro 2400 has the capacity of 2400 gallons (11m³) and available in the long wheelbase format. The horsepower requirement is from 120hp.

The full length auger rotates at 13RPM and brings the material from the front and rear of the machine to the centrally mounted discharge rotor. The hydraulically operated door opens vertically which utilizes the complete width of the discharge rotor.

The discharge rotor works at 700 RPM in an overshot direction which allows the Hardox door to act as a shear bar to fragment the material before spreading in an arc away from the side of the machine.

The tandem axle helps reduce individual axle weights both on the road and in field. A  steering rear axle can be added as on option to aid with the overall maneuverability and reduces tyre wear.

Standard Features:

Hydraulic operated side door
Hydraulically operated anti bridging arm
Reversible auger
Shearbolt protection for the auger, discharge rotor and auger paddles
Wide angle PTO
Hydraulic drop down rotor
Front & Rear Slurry Canopy
Adjustable slurry deflector
Rotor drip tray
Reversible Hardox rotor wear plates
Wooden side extension
Hydraulic Brakes
Rear ladder
Tyres – 560/60 R22.5
LED Road Lights

Powerspread Pro 3200

The Powerspread Pro 3200 has the capacity of 3200 gallons (14.5m³) and available in the long wheelbase format. The horsepower requirement is from 130hp.

The full length auger rotates at 13RPM and brings the material from the front and rear of the machine to the centrally mounted discharge rotor. The hydraulically operated door opens vertically which utilizes the complete width of the discharge rotor.

The discharge rotor works at 700 RPM in an overshot direction which allows the Hardox door to act as a shear bar to fragment the material before spreading in an arc away from the side of the machine.

Standard Features

Hydraulic operated side door
Hydraulically operated anti bridging arm
Reversible auger
Shearbolt protection for the auger, discharge rotor and auger paddles
Wide angle PTO
Hydraulic drop down rotor
Front & Rear Slurry Canopy
Adjustable slurry deflector
Rotor drip tray
Reversible Hardox rotor wear plates
Wooden side extension
Hydraulic Brakes
Rear ladder
Tyres – 650/65 R30.5
LED Road Lights

Powerspread Pro 3200 Tandem Axle

The Powerspread Pro 3200 has the capacity of 3200 gallons (14.5m³) and available in the long wheelbase format. The horsepower requirement is from 130hp.

The full length auger rotates at 13RPM and brings the material from the front and rear of the machine to the centrally mounted discharge rotor. The hydraulically operated door opens vertically which utilizes the complete width of the discharge rotor.

The discharge rotor works at 700 RPM in an overshot direction which allows the Hardox door to act as a shear bar to fragment the material before spreading in an arc away from the side of the machine.

The tandem axle helps reduce individual axle weights both on the road and in field. A  steering rear axle can be added as on option to aid with the overall maneuverability and reduces tyre wear.

Standard Features:

Hydraulic operated side door
Hydraulically operated anti bridging arm
Reversible auger
Shearbolt protection for the auger, discharge rotor and auger paddles
Wide angle PTO
Hydraulic drop down rotor
Front & Rear Slurry Canopy
Adjustable slurry deflector
Rotor drip tray
Reversible Hardox rotor wear plates
Wooden side extension
Hydraulic Brakes
Rear ladder
Tyres – 560/60 R22.5
LED Road Lights

STANDARD FEATURES - POWERMIX PLUS

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1. Auger

800mm diameter welded steel auger turning at 13 RPM transfers material from the front & rear to the discharge point. The Auger legs push the material to the rotor.

2. Door

Hydraulically operated door with vertical opening to utilize the complete rotor width. Its construction is from Hardox steel because the door also acts as a shear bar.

3. Rotor

700 RPM overshot rotor with a width of 1.4m for efficient even spread pattern.

4. Hydraulic drop down rotor

Allows greater access to remove foreign objects.

5. Auto Anti Bridge arm

This allows the Anti - Bridging arm to work in both directions manually with the tractor spoil valve.

6. Slurry canopy

These help to prevent slurry or liquids spilling during transport or on uneven ground.

7. Wooden Extension sides (2300 & 3200)

The wooden side extensions are used to give the additional capacity. The wood can easily be replaced if damage occurs by muck forks / grabs.

8. Drip Tray

Prevents spillage on the road etc.

9. Adjustable slurry deflector

This can be adjusted to achieve the desired arc and spread pattern.

10. 24 X Hardox rotor wear plates

These are also reversible to double the lifespan.

11. LED road lights

Full LED lights provide longevity & good visibility for traffic.

12. Hydraulic braked axle

Braked axle via the tractor hydraulic braking system.

13. Shearbolt protection for the Auger & Rotor

16mm Auger / Auger paddles & 8mm Rotor.

14. Reversible auger

Auger can be reversed by removing the pto and using the bottom of the two shafts.

15. Rear ladder

The rear ladder allows access to the spreader to replace shear bolts on the auger legs.

16. Wide Angle PTO

This allows the pto to be used whilst the tractor / spreader turn a gentle arch whilst in operation.

Powerspread Pro Options

Hydraulic secondary rotor For use in sticky materials where a finer spread pattern is required. Read more Automatic Anti-Bridging Kit This allows the Anti - Bridging arm to work in both directions automatically with the tractor spoil valve. Read more Straw Plates These can be bolted inside the spreader. The straw plates make the auger less aggressive as they stop too much straw wedging between the tub walls and the auger flight. Read more Additional Rear Anti-bridging kit arm (LWB) The second anti bridge arm can be added as an option for LWB machines. Read more Tyres – 650/65 R30.5 (SWB) Read more Air Brakes (single axel LWB) Air braked axle Read more Tandem sprung steering axel with Hyd brakes, Tyres 560/60 R22.5 (LWB) The tandem axle helps reduce individual axle weights both on the road and in field. The steering rear axle helps the overall maneuverability and reduces tyre wear. Read more Tandem sprung steering axel with Air brakes, Tyres 560/60 R22.5 (LWB) The tandem axle helps reduce individual axle weights both on the road and in field. The steering rear axle helps the overall maneuverability and reduces tyre wear. Read more Commercial Tandem sprung steering axel with air brakes, Tyres 600/55 R26.5 (LWB) The tandem axle helps reduce individual axle weights both on the road and in field. The steering rear axle helps the overall maneuverability and reduces tyre wear. Read more Mudguards Mudguards can be added to any LWB with Tandem Axles Read more Mechanical Parking Jack The mechanical jack can be used when using a standard clevis drawbar. Read more

Pro 2300 3D View

0%

    Need Some Advice? We are happy to help

    If you have questions or require advice about the Powerspread Pro, or any of our other products, then contact us today.

    +44 (0) 1359 250415 Send enquiry

    TECHNICAL DATA

    Enlarge
    model1800 - Short Wheel Base2300 - Short Wheel Base2400 - Long Wheel Base3200 - Long Wheel Base2400 - Tandem Axle3200 - Tandem Axle
    Capacity / Level8000 L 1800 Gallons10500 L 2300 Gallons11000 L 2400 Gallons14500 L 24 3200 Gallons11000 L 2400 Gallons14500 L 24 3200 Gallons
    Volume / Level8m³10.5m³11m³14.5m³11m³14.5m³
    Overall Length (A)6091mm6091mm7650mm7650mm7650mm7650mm
    Width over tyres (D)2700mm2700mm2650mm2650mm2655mm2655mm
    Loading height 2462mm2727mm2498mm2775mm2577mm2853mm
    Opening length (C)3213mm3658mm4751mm5313mm4751mm5313mm
    Width at top of tub (E)2180mm2180mm2180mm2180mm2180mm2180mm
    Overall height (B)2632mm2975mm2668mm3013mm2748mm3091mm
    Centre of wheel to tow hitch 5035mm5035mm5444mm5444mm5660mm5660mm
    Tyre size60 / 75 R2660 / 75 R26650/65 R30.5650/65 R30.5500/60 R22.5500/60 R22.5
    PTO speed540 rpm540 rpm540 rpm540 rpm540 rpm540 rpm
    Recommended size of tractor120 hp (upwards)120hp (upwards)120 hp (upwards)120hp (upwards)121 hp (upwards)120hp (upwards)
    Unladen weight4150kg4380kg5050kg5310kg5770kg6030kg
    Gross weight11350kg13280kg 13830kg11850kg 15050kg12110kg 18310kg18290kg18290kg
    Unladen Drawbar weight1104kg1166kg1014kg1049kg1139kg1190kg
    Max Axle weight8663kg10157kg 10586kg9912kg 12677kg10137kg 15495kg15046kg15039kg
    Max Drawbar weight2687kg3123kg 3244kg1938kg 2373kg1973kg 2815kg3244kg3251kg
    Spread widthup to 18mup to 18mup to 18mup to 18mup to 18mup to 18m
    Door size (width)1320mm1320mm1320mm1320mm1320mm1320mm
    Door operationdouble acting hydraulic ramdouble acting hydraulic ramdouble acting hydraulic ramdouble acting hydraulic ramdouble acting hydraulic ramdouble acting hydraulic ram
    Max road speed20 mph20 mph20 mph20 mph20 mph20 mph
    Note: All weights & other data are approximate.

    Weights in bold text and a 20mph (32km/h)-speed limit must not be exceeded if the machines are to be taken on public roads. These weights are based on UK road regulations stating that the weight at the wheels must not exceed 10170kg on a single axle.

    *Increased weights are for field use only (max speed 10km/h). They are derived from the maximum weights you can physically put into the machine, (figures based on manure being no heavier than 900kg/m3 ).

    The tandem axle model can be towed loaded on the public highway up to a gross weight of 18290kg, but a 20mph (32km/h)-speed limit must not be exceeded as the machine is not equipped with ABS. These weights are based on UK road regulations stating that the gross weight of an unbalanced tandem axle trailer must be limited to 18290kg. (Inclusive of the weight imposed on the towing vehicle

    Support & Guides

    Frequently Asked Questions

    The Powerspread Pro has been developed to handle most types of waste from liquid to solid and even dry material

    Yes, The Powerspread Pro is fitted with an “anti bridging arm”. This double arm blots into the left side of the machine opposite the door. A hydraulic ram swings the arm back and forth to keep the material feeding evenly to the door no matter how dry, strawy or fresh.

    No the Powerspread range just require basic lubrication and routine maintenance

    Yes, the Powerspread Pro 3200 has a capacity of 3200 gallons or 14,5 m3

    The Powerspread Pro features a number of precautions against foreign objects

    • Separate shear bolt protection on the auger, auger paddels & discharge rotor
    • Reversible auger
    • The whole discharge rotor and be lowered to remove large objects from the door

    The Powerspread Pro would require upwards of 120hp