If you have questions or require advice about the HD700 Series Hedge Cutter, or any of our other products, then contact us today.
Dealer Locator
Over 324 dealers world wide, contact your nearest dealer
View allThe HD700 Series hedge and verge cutter range has been designed hand in hand with owner driver contactors over the last 10 years, it’s range of specifications and configurations makes it suitable for both farmers and contractors.
Three models are available: HD755 5.5m Fixed boom machine, HD760T 6m Telescopic machine and HD762VFR 6.2m variable forward reach machine.
The HD755 is a fixed boom machine with a maximum reach of 5.50M, popular for verge mowing operations when the reduced weight of the non-Telescopic boom is important.
The hydraulic system has been developed to run with high pressure & low flow to reduce the pressure drops throughout the system which in turn generates less heat and maintains maximum power to the cutting head.
70HP hydraulic system |
Digital proportional joystick control |
Oil Cooler with fan |
Head Float |
Arm Float |
Auto-reset break back |
1.2m Belt drive head |
Bolted adjustable head roller |
Parallel arm geometry |
LED road lights |
Parking stands / forklift shoes |
Transport safety stop |
The HD 760T is a telescopic machine with a retracted reach of 4.80M and a maximum reach of 6.0M when fully extended. This gives the trimmer a compact design without comprise to its reach and therefore is ideal for narrow lane work.
The hydraulic system has been developed to run with high pressure & low flow to reduce the pressure drops throughout the system which in turn generates less heat and maintains maximum power to the cutting head.
70HP hydraulic system |
Digital proportional joystick control |
Oil Cooler with fan |
Head Float |
Arm float |
Auto-reset break back |
1.2m Belt drive head |
Bolted adjustable head roller |
Parallel arm geometry |
LED road lights |
Parking stands / forklift shoes |
Transport safety stop |
The HD 762VFR is a Variable forward reach machine which can be operated with the arm straight to give maximum reach of 6.2M or up to 1.50M forward for improved visibility and operator comfort.
The hydraulic system has been developed to run with high pressure & low flow to reduce the pressure drops throughout the system which in turn generates less heat and maintains maximum power to the cutting head.
70HP hydraulic system |
Digital proportional joystick control |
Oil Cooler with fan |
Head Float |
Arm float |
Auto-reset break back |
1.2m Belt drive head |
Bolted adjustable head roller |
Parallel arm geometry |
LED road lights |
Parking stands / forklift shoes |
Transport safety stop |
The HD 1200 is the standard head fitted to the 6,7 & 800 Series Hedge trimmers
Options:
Cutting Width 1.2m |
Low Profile |
Double Skinned |
Rotor Diameter 110mm |
Roller Diameter 125mm |
Twin Vee Drive |
50mm Rotor Bearing |
Fixed Mounting |
Double Spiral Flail Pattern |
24 x Drop Forged Flails |
T or Competition Flails |
Weight - 350Kg |
The HD1500 is an optional head fitted to 6,7 & 800 Series Hedgetrimmers with a working width of 1.5m
Options:
Hydraulic Head Roller
Hydraulic Nose (Top Mounted Rams)
Verge Kit
Left or Right Head Drive
Cutting Width 1.5m |
Low Profile |
Double Skinned |
Rotor Diameter 120mm |
Roller Diameter 125mm |
Twin Vee Drive |
50mm Rotor Bearing |
Fixed Mounting |
Double Spiral Flail Pattern |
30 x Drop Forged Flails |
T or Competition Flails |
Weight - 400Kg |
The digital proportional joystick is the standard control system for the 700 Series trimmer. The Main functions of the joystick are fully programmable to suit individual operators.
Proportional Lift, Reach & Head Angling |
Programmable Joystick Control |
Electric Start Bi-Direction Rotor |
Switched Electric Slew & Telescopic |
Electric Float Engagement |
Auto Break Back / Reset |
LCD Screen |
Hour Counter |
Easy Mount Seat Bracket |
The 70hp system runs with high oil pressure with a low flow rate which equates to constant power to the flail.
The operation of the joystick can be adjusted to suit the individual operator.
The oil cooler helps to maintain the oil temperature. The auto reverse feature prevents material build up which will reduce air flow.
The standard 1.2M head can be fitted with either an inboard or outboard drive.
This provides a safety stop whilst in transport and protection to the tractor cab.
The arm float uses an accumulator system to provide movement to the arm when operating on the ground.
The auto break back feature helps maintain the slew position of the arm.
Full LED lights provide longevity & good visibility to oncoming traffic.
The parking stands also act as fork lift brackets, which allow easy movement of the trimmer when not attached to a tractor.
If you have questions or require advice about the HD700 Series Hedge Cutter, or any of our other products, then contact us today.
Technical Specifications | HD755 | HD760 T | HD762 VFR |
---|---|---|---|
Controls | |||
Electronic Proportional Joystick Control | Standard | Standard | Standard |
Hydraulics | |||
Oil Capacity | 150litres | 150litres | 150litres |
Independent Hydraulics | Standard | Standard | Standard |
Oil Cooler | Standard | Standard | Standard |
Arm Features | |||
Parallel Boom Geometry | Standard | Standard | Standard |
Boom type | Fixed | Telescopic | VFR |
Hydraulic Slew | 90deg | 90deg | 90deg |
Arm Break Back | Standard | Standard | Standard |
Head Float | Standard | Standard | Standard |
Arm Float | Standard | Standard | Standard |
Flailhead Features | |||
Twin 'v' Belt head system | Standard | Standard | Standard |
1.2m head | Standard | Standard | Standard |
1.5m head | Optional | Optional | Optional |
Drive System flow | 100 l/min | 100 l/min | 100 l/min |
Drive System Pressure | 275 bar | 275 bar | 275 bar |
Head Angling | 240deg | 240deg | 240deg |
Roller Diameter | 125mm | 125mm | 125mm |
Hydraulically adjustable roller | Optional | Optional | Optional |
Weights | |||
Machine Weight inc head & oil | 1725kg | 1850kg | 1900kg |
Min Tractor Weight | 4000kg | 4250kg | 4500kg |
Min Tractor | 90HP | 90HP | 100HP |
Mounting System | |||
4pt Mounting | Optional | Optional | Optional |
Axle Mounting | Optional | Optional | Recommended |
Accessories | |||
LED Road Lights | Standard | Standard | Standard |
Warning: It is the customers responsibility to ensure that they do not exceed the tractor OEM (original equipment manufacturers) specification for implement mounting and hitch capability and that the trimmer installation is technically appropriate based on the weight and size of the tractor and its implement attachment system. |
REACH DIMENSIONS | HD755 | HD760T | HD762VFR | ||
---|---|---|---|---|---|
Retracted | Extended | Straight | Forward | ||
Max reach (A) head horizontal | 5.56mt | 4.90mt | 6.03mt | 6.05mt | 5.55mt |
Max reach (B) head vertical | 5.37mt | 4.71mt | 5.84mt | 5.86mt | 5.36mt |
Max height (C) head vertical | 6.73mt | 6.09mt | 7.01mt | 7.15mt | 6.76mt |
Max height (D) head horizontal | 5.72mt | 5.08mt | 5.99mt | 6.15mt | 5.65mt |
Max reach (E) downwards | 3.68mt | 3.05mt | 4.22mt | 4.19mt | 3.69mt |
Min siding width (F) to tank | 2.24mt | 2.29mt | N/R | 2.29mt | N/R |
Min siding width (G) to centre | 1.28mt | 1.33mt | N/R | 1.38mt | N/R |
Height (H) to pivot | 1.55mt | 1.55mt | 1.55mt | 1.55mt | 1.55mt |
All dimensions above with 1.2mt head (HD762 VFR 1.5m forward) |
Looking for something specific?
Search our support area for individual model set-up guides and more...
HD755 & HD760T models can be either 4 point linkage or axle mounted but are not dedicated either way. However a HD762 VFR is recommended to be fitted with an Axle mounting system.
Yes, the flails are arranged in a double spiral which gives a better cut finish and ejects significantly less debris to the side
The standard system produces 70HP using Shelbourne high pressure hydraulic system on all 600.700 & 800 Series, an 85HP hydraulic system is optional extra
The 4pt stabiliser is a combination of a 3pt stabiliser frame with an under tank drawbar stabiliser, giving 4 main points attaching the trimmer to the tractor
All 700 series machines are specified with durable drop forged flails as standard, these are available in either “T” or Competition configuration