Dealer Locator
Over 324 dealers world wide, contact your nearest dealer
View all
| Wheat (0-30 bu/ac) | Wheat (30-50 bu/ac) | Wheat (>50 bu/ac) | Rice | |
|---|---|---|---|---|
| Feeder House Face Plate | Tilted back towards combine | Tilted back towards combine | Tilted back towards combine | Tilted back towards combine |
| Concaves | Small Wire | Small Wire | Small Wire | Round Bar |
| Concave Cover Plates | 4 Covers in Front | 4 Covers in Front | None | None |
| Concave Position | 10mm | 13mm | 13mm | 19mm |
| Combine Rotors | 1200 | 1100 | 1000 | 1000 |
| Cleaning Fan (rpm) | 1000 | 1050 | 1100 | 1100 |
| Pre-Cleaner | Closed | Closed | Closed | Slightly Open |
| Top Chaffer | 60% Open | 70% Open | 75% Open | 100% Open |
| Bottom Sieve | 20% Open | 30% Open | 40% Open | 100% Open |
| Combine Feeder House Chain Position | Headers with retractable fingers in the auger, chain should be up. Headers with NO retractable fingers, fully flighted auger with paddles, chain should be down. |
| Front Dust Cover | Top section removed if retractable fingers fitted in auger and feeder house chain up, if no retractable fingers fitted then all sections fitted |
| Header Rotor Speed (rpm) | Stripping rotor should be run as slow as possible and still stripping the grain from the head. |
| Header Auger Speed (rpm) | Header auger speed is fixed and is determined by auger drive sprocket, should always be under 200. |
|
* Augers with spiral paddles require no fingers and front feeder house drum down
|
|
